International_Marketing

INTERNATIONAL MARKETING International marketing is simply the application of marketing principles to more than one country. However, there is a crossover between what is commonly expressed as international marketing and global marketing, which is a similar term. For the purposes of this lesson on international marketing and those that follow it, international marketing and global marketing are interchangeable. Trade is increasingly global in scope today. There are several reasons for this. One significant reason is technological—because of improved transportation and communication opportunities today, trade is now more practical. Thus, consumers and businesses now have access to the very best products from many different countries. Increasingly rapid technology lifecycles also increases the competition among countries as to who can produce the newest in technology. We discussed several stages through which a firm may go as it becomes increasingly involved across borders. A purely domestic firm focuses only on its home market, has no current ambitions of expanding abroad, and does not perceive any significant competitive threat from abroad. Such a firm may eventually get some orders from abroad, which are seen either as an irritation (for small orders, there may be a great deal of effort and cost involved in obtaining relatively modest revenue) or as "icing on the cake." As the firm begins to export more, it enters the export stage, where little effort is made to market the product abroad, although an increasing number of foreign orders are filled. In the international stage, as certain country markets begin to appear especially attractive with more foreign orders originating there, the firm may go into countries on an ad hoc basis—that is, each country may be entered sequentially, but with relatively little learning and marketing efforts being shared across countries. In the multi-national stage, some efficiency is pursued by standardizing across a region (e.g., Central America, West Africa, or Northern Europe). Finally, in the global stage, the focus centers on the entire World market, with decisions made optimize the product’s position across markets—the home country is no longer the center of the product Note that these stages represent points on a continuum from a purely domestic orientation to a truly global one; companies may fall in between these discrete stages, and different parts of the firm may have characteristics of various stages—for example, the pickup truck division of an auto-manufacturer may be largely domestically focused, while the passenger car division is globally focused. Although a global focus is generally appropriate for most large firms, note that it may not be ideal for all companies to pursue the global stage. For example, manufacturers of ice cubes may do well as domestic, or even locally centered, firms. Some forces in international trade. The text contains a rather long-winded appendix discussing some relatively simple ideas. Comparative advantage, discussed in more detail in the economics notes, suggests trade between countries is beneficial because these countries differ in their relative economic strengths—some have more advanced technology and some have lower costs. The International Product Life Cycle suggests that countries will differ in their timing of the demand for various products. Products tend to be adopted more quickly in the United States and Japan, for example, so once the demand for a product (say, VCRs) is in the decline in these markets, an increasing market potential might exist in other countries (e.g., Europe and the rest of Asia). Internalization/transaction costs refers to the fact that developing certain very large scale projects, such as an automobile intended for the World market, may entail such large costs that these must be spread over several countries. ECONOMICS OF INTERNATIONAL TRADE: Exchange rates come in two forms: • “Floating”—here, currencies are set on the open market based on the supply of and demand for each currency. For example, all other things being equal, if the U.S. imports more from Japan than it exports there, there will be less demand for U.S. dollars (they are not desired for purchasing goods) and more demand for Japanese yen—thus, the price of the yen, in dollars, will increase, so you will get fewer yen for a dollar. • “Fixed”—currencies may be “pegged” to another currency (e.g., the Argentine currency is guaranteed in terms of a dollar value), to a composite of currencies (i.e., to avoid making the currency dependent entirely on the U.S. dollar, the value might be 0.25*U.S. dollar+4*Mexican peso+50*Japanese yen+0.2*German mark+0.1*British pound), or to some other valuable such as gold. Note that it is very difficult to maintain these fixed exchange rates—governments must buy or sell currency on the open market when currencies go outside the accepted ranges. Fixed exchange rates, although they produce stability and predictability, tend to get in the way of market forces—if a currency is kept artificially low, a country will tend to export too much and import too little. Trade balances and exchange rates. When exchange rates are allowed to fluctuate, the currency of a country that tends to run a trade deficit will tend to decline over time, since there will be less demand for that currency. This reduced exchange rate will then tend to make exports more attractive in other countries and imports less attractive at home. Legal systems of the World. There are four main approaches to law across the World, with some differences within each: • Common law, the system in effect in the U.S., is based on a legal tradition of precedent. Each case that raises new issues is considered on its own merits, and then becomes a precedent for future decisions on that same issue. Although the legislature can override judicial decisions by changing the law or passing specific standards through legislation, reasonable court decisions tend to stand by default. • Code law, which is common in Europe, gives considerably shorter leeway to judges, who are charged with “matching” specific laws to situations—they cannot come up with innovative solutions when new issues such as patentability of biotechnology come up. There are also certain differences in standards. For example, in the U.S. a supplier whose factory is hit with a strike is expected to deliver on provisions of a contract, while in code law this responsibility may be nullified by such an “act of God.” • Islamic law is based on the teachings of the Koran, which puts forward mandates such as a prohibition of usury, or excessive interest rates. This has led some Islamic countries to ban interest entirely; in others, it may be tolerated within reason. Islamic law is ultimately based on the need to please God, so “getting around” the law is generally not acceptable. Attorneys may be consulted about what might please God rather than what is an explicit requirements of the government. • Socialist law is based on the premise that “the government is always right” and typically has not developed a sophisticated framework of contracts (you do what the governments tells you to do) or intellectual property protection (royalties are unwarranted since the government ultimately owns everything). Former communist countries such as those of Eastern Europe and Russia are trying to advance their legal systems to accommodate issues in a free market. Warning about stereotyping. When observing a culture, one must be careful not to over-generalize about traits that one sees. Research in social psychology has suggested a strong tendency for people to perceive an “out-group” as more homogenous than an “in-group,” even when they knew what members had been assigned to each group purely by chance. When there is often a “grain of truth” to some of the perceived differences, the temptation to over-generalize is often strong. Note that there are often significant individual differences within cultures. Ethnocentrism and the self-reference criterion. The self-reference criterion refers to the tendency of individuals, often unconsciously, to use the standards of one’s own culture to evaluate others. For example, Americans may perceive more traditional societies to be “backward” and “unmotivated” because they fail to adopt new technologies or social customs, seeking instead to preserve traditional values. In the 1960s, a supposedly well read American psychology professor referred to India’s culture of “sick” because, despite severe food shortages, the Hindu religion did not allow the eating of cows. The psychologist expressed disgust that the cows were allowed to roam free in villages, although it turns out that they provided valuable functions by offering milk and fertilizing fields. Ethnocentrism is the tendency to view one’s culture to be superior to others. The important thing here is to consider how these biases may come in the way in dealing with members of other cultures. It should be noted that there is a tendency of outsiders to a culture to overstate the similarity of members of that culture to each other. In the United States, we are well aware that there is a great deal of heterogeneity within our culture; however, we often underestimate the diversity within other cultures. For example, in Latin America, there are great differences between people who live in coastal and mountainous areas; there are also great differences between social classes. Different perspectives exist in different cultures on several issues; e.g.: • Monochronic cultures tend to value precise scheduling and doing one thing at a time; in polychronic cultures, in contrast, promptness is valued less, and multiple tasks may be performed simultaneously. (See text for more detail). • Space is perceived differently. Americans will feel crowded where people from more densely populated countries will be comfortable. • Symbols differ in meaning. For example, while white symbols purity in the U.S., it is a symbol of death in China. Colors that are considered masculine and feminine also differ by culture. • Americans have a lot of quite shallow friends toward whom little obligation is felt; people in European and some Asian cultures have fewer, but more significant friends. For example, one Ph.D. student from India, with limited income, felt obligated to try buying an airline ticket for a friend to go back to India when a relative had died. • In the U.S. and much of Europe, agreements are typically rather precise and contractual in nature; in Asia, there is a greater tendency to settle issues as they come up. As a result, building a relationship of trust is more important in Asia, since you must be able to count on your partner being reasonable. • In terms of etiquette, some cultures have more rigid procedures than others. In some countries, for example, there are explicit standards as to how a gift should be presented. In some cultures, gifts should be presented in private to avoid embarrassing the recipient; in others, the gift should be made publicly to ensure that no perception of secret bribery could be made. Data reliability. The accuracy and objectivity of data depend on several factors. One significant one is the motivation of the entity that releases it. For example, some countries may want to exaggerate their citizens’ literacy rates owing to national pride, and an organization promoting economic development may paint an overly rosy picture in order to attract investment. Some data may be dated (e.g., a census may be conducted rarely in some regions), and some countries may lack the ability to collect data (it is difficult to reach people in the interior regions of Latin America, for example). Differences in how constructs are defined in different countries (e.g., is military personnel counted in people who are employed') may make figures of different jurisdictions non-comparable. Cost of data. Much government data, or data released by organizations such as the World Bank or the United Nations, is free or inexpensive, while consultants may charge very high rates. Issues in primary research. Cultural factors often influence how people respond to research. While Americans are used to market research and tend to find this relatively un-threatening, consumers in other countries may fear that the data will be reported to the government, and may thus not give accurate responses. In some cultures, criticism or confrontation are considered rude, so consumers may not respond honestly when they dislike a product. Technology such as scanner data is not as widely available outside the United States. Local customs and geography may make it difficult to interview desired respondents; for example, in some countries, women may not be allowed to talk to strangers. Approaches to global segmentation. There are two main approaches to global segmentation. At the macro level, countries are seen as segments, given that country aggregate characteristics and statistics tend to differ significantly. For example, there will only be a large market for expensive pharmaceuticals in countries with certain income levels, and entry opportunities into infant clothing will be significantly greater in countries with large and growing birthrates (in countries with smaller birthrates or stable to declining birthrates, entrenched competitors will fight hard to keep the market share). There are, however, significant differences within countries. For example, although it was thought that the Italian market would demand "no frills" inexpensive washing machines while German consumers would insist on high quality, very reliable ones, it was found that more units of the inexpensive kind were sold in Germany than in Italy—although many German consumers fit the predicted profile, there were large segment differences within that country. At the micro level, where one looks at segments within countries. Two approaches exist, and their use often parallels the firm’s stage of international involvement. • Intra market segmentation involves segmenting each country’s markets from scratch—i.e., an American firm going into the Brazilian market would do research to segment Brazilian consumers without incorporating knowledge of U.S. buyers. In contrast, • Inter market segmentation involves the detection of segments that exist across borders. Note that not all segments that exist in one country will exist in another and that the sizes of the segments may differ significantly. For example, there is a huge small car segment in Europe, while it is considerably smaller in the U.S. Inter market segmentation entails several benefits. The fact that products and promotional campaigns may be used across markets introduces economies of scale, and learning that has been acquired in one market may be used in another—The international product life cycle suggests that product adoption and spread in some markets may lag significantly behind those of others. Often, then, a segment that has existed for some time in an "early adopter" country such as the U.S. or Japan will emerge after several years (or even decades) in a "late adopter" country such as Britain or most developing countries. (We will discuss this issue in more detail when we cover the product mix in the second half of the term). Positioning across markets. Firms often have to make a tradeoff between adapting their products to the unique demands of a country market or gaining benefits of standardization such as cost savings and the maintenance of a consistent global brand image. There are no easy answers here. On the one hand, McDonald’s has spent a great deal of resources to promote its global image; on the other hand, significant accommodations are made to local tastes and preferences—for example, while serving alcohol in U.S. restaurants would go against the family image of the restaurant carefully nurtured over several decades, McDonald’s has accommodated this demand of European patrons. Methods of entry. With rare exceptions, products just don’t emerge in foreign markets overnight—a firm has to build up a market over time. Several strategies, which differ in aggressiveness, risk, and the amount of control that the firm is able to maintain, are available: • Exporting is a relatively low risk strategy in which few investments are made in the new country. A drawback is that, because the firm makes few if any marketing investments in the new country, market share may be below potential. Further, the firm, by not operating in the country, learns less about the market (What do consumers really want' Which kinds of advertising campaigns are most successful' What are the most effective methods of distribution') If an importer is willing to do a good job of marketing, this arrangement may represent a "win-win" situation, but it may be more difficult for the firm to enter on its own later if it decides that larger profits can be made within the country. • Licensing and franchising are also low exposure methods of entry—you allow someone else to use your trademarks and accumulated expertise. Your partner puts up the money and assumes the risk. Problems here involve the fact that you are training a potential competitor and that you have little control over how the business is operated. For example, American fast food restaurants have found that foreign franchisers often fail to maintain American standards of cleanliness. Similarly, a foreign manufacturer may use lower quality ingredients in manufacturing a brand based on premium contents in the home country. • Turnkey Projects. A firm uses knowledge and expertise it has gained in one or more markets to provide a working project—e.g., a factory, building, bridge, or other structure—to a buyer in a new country. The firm can take advantage of investments already made in technology and/or development and may be able to receive greater profits since these investments do not have to be started from scratch again. However, getting the technology to work in a new country may be challenging for a firm that does not have experience with the infrastructure, culture, and legal environment. • Management Contracts. A firm agrees to manage a facility—e.g., a factory, port, or airport—in a foreign country, using knowledge gained in other markets. Again, one thing is to be able to transfer technology—another is to be able to work in a new country with a different infrastructure, culture, and political/legal environment. • Contract manufacturing involves having someone else manufacture products while you take on some of the marketing efforts yourself. This saves investment, but again you may be training a competitor. • Direct entry strategies, where the firm either acquires a firm or builds operations "from scratch" involve the highest exposure, but also the greatest opportunities for profits. The firm gains more knowledge about the local market and maintains greater control, but now has a huge investment. In some countries, the government may expropriate assets without compensation, so direct investment entails an additional risk. A variation involves a joint venture, where a local firm puts up some of the money and knowledge about the local market. Products and Services. Some marketing scholars and professionals tend to draw a strong distinction between conventional products and services, emphasizing service characteristics such as heterogeneity (variation in standards among providers, frequently even among different locations of the same firm), inseparability from consumption, intangibility, and, in some cases, perishability—the idea that a service cannot generally be created during times of slack and be “stored” for use later. However, almost all products have at least some service component—e.g., a warranty, documentation, and distribution—and this service component are an integral part of the product and it’s positioning. Thus, it may be more useful to look at the product-service continuum as one between very low and very high levels of tangibility of the service. Income tax preparation, for example, is almost entirely intangible—the client may receive a few printouts, but most of the value is in the service. On the other hand, a customer who picks up rocks for construction from a landowner gets a tangible product with very little value added for service. Firms that offer highly tangible products often seek to add an intangible component to improve perception. Conversely, adding a tangible element to a service—e.g., a binder with information—may address many consumers’ psychological need to get something to show for their money. Product Need Satisfaction. We often take for granted the “obvious” need that products seem to fill in our own culture; however, functions served may be very different in others—for example, while cars have a large transportation role in the U.S., they are impractical to drive in Japan, and thus cars there serve more of a role of being a status symbol or providing for individual indulgence. In the U.S., fast food and instant drinks such as Tang are intended for convenience; elsewhere, they may represent more of a treat. Thus, it is important to examine through marketing research consumers’ true motives, desires, and expectations in buying a product.