Eco_Design_(2009)

European Commission Enterprise and Industry How Ecodesign can help the environment by making products smarter Ecodesign Your Future How ecodesign can help the environment by making products smarter All products have an impact on the environment during their life-cycle spanning all phases from cradle to grave, such as the use of raw materials and natural resources, manufacturing, packaging, transport, disposal and recycling. More than 80% of the environmental impact of a product is determined at the design stage. Ecodesign implies taking into account all the environmental impacts of a product right from the earliest stage of design. This especially avoids uncoordinated product planning (for example, eliminating a toxic substance should not lead to increased energy consumption, which on balance could have a negative impact on the environment). The Ecodesign Directive provides a coherent and integrated framework which allows for setting compulsory ecodesign requirements for some products. For instance, the Ecodesign measure on standby requires that much domestic electrical and electronic equipment such as washing machines, televisions or personal computers do not consume more than 1W in off mode as of 2010, and not more than 0.5W as of 2013. However, such ecodesign requirements shall not lower the functionality of a product, its safety, or have a negative impact on consumer’s health and its affordability. A medical device, for example, should not be designed to consume less energy at the cost of quality or patient safety. The European Commission has developed a methodology to assess whether ecodesign requirements should apply to a given product, and if yes, to identify which ecodesign requirements are appropriate (see also point 4). For more information on this Methodology for the Ecodesign of Energy-Using Products (MEEUP), please see website of DG Enterprise and Industry: http://ec.europa.eu/enterprise/policies/sustainable-business/sustainable-product-policy/ecodesign/methodology/index_en.htm If, for instance, ecodesign requirements for household refrigera- Ecodesign Measure Standby Simple set top boxes Street & Office Lighting Domestic Lighting External power supplies Electric motors Circulators Domestic refrigeration Televisions Total Adoption December 2008 February 2009 March 2009 March 2009 April 2009 July 2009 July 2009 July 2009 July 2009 Estimated savings (annual by 2020) 35 TWh 6 TWh 38 TWh 37 TWh 9 TWh 140 TWh 27 TWh 6 TWh 43 TWh 341 TWh Which products does the Ecodesign Directive cover' The Ecodesign Directive has been extended in 2009 to all energy-related products (the use of which has an impact on energy consumption), including: • energy-using products (EUPs): products which use, generate, transfer or measure energy (e.g. electricity, gas, fossil fuel), including consumer goods such as boilers, computers, TVs, washing machines, light bulbs and industrial products such as transformers, industrial fans, industrial furnaces. • other energy related products (ERPs): products which do not necessarily use energy, but have an impact on energy consumption (direct or indirect) and can therefore contribute to saving energy, such as windows, insulation material or bathroom devices (e.g. shower heads, taps). The Ecodesign Directive does not create binding requirements on products by itself: product requirements are set in Commission Regulations (see also point 4) TVs machine tools computers water boiler refrigerating equipment air conditioning What type of product requirements can be set at EU level' The Ecodesign Directive foresees 2 types of mandatory product requirements: specific requirements: •  Set  limit values, such as maximum energy consumption or minimum quantities of recycled material. generic requirements: •  Do not set limit values •  May  require,  for  example,  that  the  energy  consumption  of  the product be as low as possible (compliance with the relevant harmonised European standard, if available, gives presumption of conformity with the requirement). •  May  entail  information requirements, such as material provided by the manufacturer about best practices to use and maintain the product in order to minimise its environmental impact. •  May require that the manufacturer perform a lifecycle analysis  of the product in order to identify alternative design options and solutions for improvement Under the Ecodesign Directive, voluntary agreements by industry are considered as a valid alternative to mandatory requirements under certain conditions. The voluntary agreement must achieve the same objectives as binding legislation in a more rapid and costeffective manner. The voluntary agreement must deliver added value compared to the ‘business as usual’ scenario, through quantified and staged objectives. It must foresee credible monitoring and reporting (including independent inspections) and represent a majority of the industrial sector under consideration. Additional conditions are detailed in Annex VIII of the Ecodesign Directive. How are mandatory product requirements decided' 1 1 2 3 4 5 The Commission ensures a common understanding of the framework Directive and its implementing measures through meetings of representatives of Member States and all interested stakeholders, in the Ecodesign Working Group. All issues relating to the implementation of the Directive, including market surveillance, are discussed there. The European Commission adopts a Working Plan, which sets out an indicative list of priority products to be explored for their Ecodesign potential over the next 3 years. Each product group mentioned in the Working Plan is analysed in a preparatory study, in order to assess whether and which ecodesign requirements are appropriate (according to the Methodology for the Ecodesign of Energy-using products MEEUP). A thorough impact assessment follows, which lays down essential figures such as energy saving potential or costs for industry. A draft Commission Regulation is submitted to the Consultation Forum (representatives of EU and EEA Member States and of 30 stakeholders such as business federations, NGOs and consumer organisations) for comments. The draft is submitted to the vote of the Regulatory Committee 2 3 4 (representatives of EU Member States). 5 the European Parliament for 3 months. The draft Commission Regulation remains under the scrutiny of What are the next steps' The current Working Plan contains an indicative list of products to be investigated in priority by October 2011 including products like commercial refrigerating equipment, sound and imaginge quipment (such as DVD players and game consoles), food preparing equipment (such as ovens, hobs and grills, coffee machines) and machine tools. A new Working Plan for the period of 20112014 will be drawn up in 2011. The effectiveness of the Ecodesign Directive and its implementing measures has to be reviewed by the European Commission no later than 2012. Based on this review, the Commission shall assess the appropriateness of extending the scope of the Directive beyond energy related products. The Commission will also review the Methodology for the Ecodesign of Energy-Using Products (MEEUP), taking into consideration the experience gained with the first implementing measures. Which department is responsible for the Ecodesign Directive in the Commission' The Ecodesign Directive is under the common responsibility of DG Enterprise & Industry and DG Energy. Contact: ENTR-EcoDesign@ec.europa.eu and TREN-EcoDesign@ec.europa.eu Sustainable product policy As presented in the Action Plan on a Sustainable Industrial Policy / Sustainable Consumption and Production (COM 2008 397/3), the Ecodesign Directive is meant to be used in consistency with other tools such as labelling (Energy Label and Ecolabel), public procurement (Green Public Procurement) and financial incentives, to deliver its full potential. ENVIRONMENTAL PERFORMANCE A B C D E F G Ecodesign Requirements Non compliant products % OF PRODUCTS COVERED European Enterprise Directorate-General for Enterprise and Industry WE MEAN BUSINESS http://ec.europa.eu/enterprise/policies/sustainable-business/sustainable-product-policy/ecodesign To find out more: Contact: ENTR-EcoDesign@ec.europa.eu and TREN-EcoDesign@ec.europa.eu This brochure is financed under the Competitiveness and Innovation Framework Programme (CIP) which aims to encourage the competitiveness of European enterprises