Cert_Ed_Module_4

Cert Ed – Module 4 - Evaluation & Action Research Assignment Project to Study & Research a Learning Programme for 14 to 16 year olds. Introduction; The Learning Programme Getting Started The student is provided with a brief text description of what this module is about. It may be beneficial to go through the text with them after letting them read through it. The course content whilst structured, is also designed to provide flexibility of delivery. It may be an idea to ‘tailor’ the content to suit the course on offer, depending on how long you have the group for. Most modules include activities. In each case an opportunity for feedback is provided within the text. The number of activities can be increased or decreased About the Course The course structure is provided at Fig.1, this is explained to student during induction. The course is designed to integrate key/core skills. They are encouraged, where Possible to use ICT applications. This could include: • Internet/Intranet research, • site access to manufacturers products • Use of word processing skills to complete written exercises • Simple drawing/design packages Figure 1 – Course Structure To go through the course structure/content at Fig.1. with the student. This will vary depending on the course duration and the diagram and presentation will be tailored accordingly. M O D U L E 1 PLUMBING COURSE INTRODUCTION Experience the exciting world of Plumbing and Heating A learning programme for 14 to 16 year olds PACK 1 Mandatory Mod 1 _ PLUMBING COURSE INTRODUCTION - 0.5 hours Mod 2 _ INTRODUCTION TO THE PLUMBING INDUSTRY - 0.75 hours Mod 3 _ A CAREER IN PLUMBING - 0.25 hours Mod 4 _ HEALTH AND SAFETY - 0.5 hours PACK 2 Mod 5 _ PLUMBING TOOLS AND MATERIALS - 3 hours Mod 6 _ PLUMBING TOOLS AND MATERIALS (PRACTICAL) - 3 hours PACK 3 Mod 7 _ PRACTICAL ACTIVITIES - 4 hours Mod 8 _ DEVELOPING PLUMBING SKILLS - 4 hours PACK 4 Mod 9 _ STUDENT OBSERVATION - 2 hours Mod 10 _ PLUMBING IN THE HOME - 4 hours OPTIONS 1 + 2 Mod 11 _ SITE VISIT - as required Mod 12 _ COMPUTER AIDED DRAUGHTING (CAD) - 8 hours Student / Peer observation As part of the course the student will be required to shadow an NVQ student whilst they carry out training activities. This will include assisting the NVQ student with whatever practical work they are carrying out, together with conducting a discussion with them based on a standard set of questions which are included in the Module text under section 1. The shadow experience will assist the NVQ student by contributing to the evidence required under the following NVQ elements. Element 5.1 AA1 range 2-B Element 5.2 AA2 range 2-C Element 5.3 AA1 range 1-C and 2-C Element 6.1 AA1 range 1-A Element 6.2 AA1 range 1-BC Once the student has worked with the NVQ student they will be asked to write up a report of what they have done. They may wish to use this experience as a basis for group discussion. It is essential to ensure that both students are aware of the responsibilities in terms of health and safety, and that adequate supervision is in place. CERTIFICATION When the student has completed the course you will need to carry out an assessment of the candidate based on their:- • Attitude • Enthusiasm • Knowledge and understanding of the subject • Practical skills (if applicable) • Initiative This will be applied to each module. If successful the candidate will be issued with a Course Certificate. The modules completed will be included on the certificate. An assessment form and guidance on procedures is provided in the support material.