A_General_Description_Of_A_Nitrous_Fogger

A General Description Of A Nitrous Fogger A General Description of a Nitrous Fogger Ben Barnard Introduction A nitrous fogger is a high strength Y-shaped piece of aluminum used to direct a nitrous oxide and fuel mixture into the intake of an engine. The nitrous fogger is two and three quarters of an inch in length. The tip of the fogger is cylindrical without threads for the first three quarters of an inch. The next half an inch is threaded, which is directly threaded into the throttle body (or intake tube). The main body of the fogger is used to mix the fuel and nitrous oxide. By removing the fittings at the rear of the unit, the regulator jets, unseen, can be changed. The removable fittings are attached to their required sources for fuel and nitrous oxide. See the figure. Figure 1 Nitrous Fogger Discussion A nitrous fogger has six parts: nozzle, shaft, threads, main body, two regulator jets, and two removable fittings. Nozzle The nozzle of the fogger is an opening where the fuel/nitrous oxide mixture exits through into the throttle body. The opening is one-eighth on an inch wide in a half moon shape. Shaft The shaft on a nitrous fogger in cylindrical in shape, that extends into nitrous, fogger, body, main, fittings, shaft, removable, throttle, threads, regulator, jet, inch, fuel, oxide, jets, intake, figure, two, tube, threaded, nozzle, mixture, through, one, half, foggers, cylindrical, time, three, small, shape, screws, rear, quarters, portion